Overview LED indicators

Camera adapter example

The LED indicators on the adapter should be working as in the example below:

  • PLC: on
  • ACT: blinks fast
  • PWR: on
  • ETH: blinks fast
  • POE: on

Deviating LED indicators

Do the LED indicators deviate? Read below which actions to take. Is your adapter still not working after following these steps? Please contact us and share your findings.

Status Cause/solution
PWR off

Adapter doesn't get power

1) Try another wall socket

POE off

Adapter doesn't provide power to the camera

1) Check if the cable is connected well

2) Use a different cable

ETH not blinking (off or on constant)

Adapter has no connection with the camera

1) Check if the cable is connected well

2) Use a different cable

3) Acces to the wall socket is limited. Try another wall socket

ACT not blinking or blinking slowely.

No data transmission

1) Connect the adapter directly to a wall socket (prevent extension sockets) 

2) Acces to the wall socket is limited. Try another wall socket

PLC off

No connection with other adapter

1) Connect the adapter directly to a wall socket (prevent extension sockets) 

2) Acces to the wall socket is limited. Try another wall socket

Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request