Wireless camerasystem set up (HD PLUS)

Step 1: install the recorder

  • Connect a monitor to the HDMI connection on the recorder
  • Connect the mouse on the USB connection on the recorder
  • Connect a networkcable to the video input/LAN 1 connection on the recorder
  • Connect the other side of the networkcable to a PA1 adapter
  • Connect the PA1 adapter directly to a wall socket (prevent extension sockets)
  • Connect the power supply to the recorder
  • Switch the recorder on
  • Login with:
    • Username: admin
    • Password: admin

Step 2: install the cameras

  • Place the cameras in the right position
  • Connect a networkcable to the camera
  • Connect the other side of the networkcable to a PA2 adapter
  • Connect the PA2 adapter directly to a wall socket (prevent extension sockets)
  • Using the cameras outdoor? Make sure the connections are protected against moisture
  • Wait a few minutes till the images appear on the monitor

The system records automatically and is fully operational.

Was this article helpful?
7 out of 13 found this helpful
Have more questions? Submit a request