Motion recording (RSV)

In addition to continuous recording, you can also set the recorder to record on movement only. Please go through the following steps to make this work:

  1. Go to MAIN MENU on the recorder
  2. Click on RECORD (left side) and then RECORD SCHEDULE
  3. Remove all the green bars in the chart by clicking the left mouse and select all the green bars. Now release the mouse. The green bars are gone now
  4. Now select the option MOTION RECORD and add yellow bars in the diagram. This is done as described at point 3
  5. Now click on the COPY button and click SAVE
  6. Reboot the recorder to secure these settings. This is done using the option SHUTDOWN at the top right of the menu
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request