How can I add or remove cameras?

Choose your device: 

Use the recorder

1. Drag your mouse pointer to the bottom of the screen and click on the leftmost icon .

2. Click on Settings.

3. Enter your password and click Unlock.

4. Click Cameras and then IP channels.

5. In the following picture you can see all currently connected cameras in the lower part. All active cameras are marked as green under Status. All cameras that are not connected are highlighted in gray.
6. If there are cameras underneath that are no longer connected to the recorder, you can remove them using the red trash can symbol to release the channel.
7. You can then add new cameras by clicking on Add all cameras.

Use the computer

1. Click on Remote setting .
2. Navigate to Channel and then select Channel.

3. All active cameras are marked as green under Status. All cameras that are not connected are highlighted in gray.

4. If there are cameras underneath that are no longer connected to the recorder, you can remove them using the trash can icon to free up the channel.

5. You can then add new cameras by clicking on Auto Add IPC.