1. Home
  2. Installation
  3. Connect a camera using the Wi-Fi adapter

Connect a camera using the Wi-Fi adapter

The Wi-Fi Adapter (PWA) allows you to connect a camera to the recorder via your Wi-Fi network. Ensure a strong Wi-Fi signal is available at the adapter's installation location. If the signal quality is insufficient, consider using a Wi-Fi extender to improve coverage.

Step 1: update the camera's network settings

When cameras are initially connected to the recorder, they are configured for an optimized direct connection. This configuration may interfere with the Wi-Fi setup, so it's necessary to update the camera's network settings.

Use a network cable to connect the camera directly to one of the LAN ports on your recorder. Then change the camera's IP address from static to dynamic:

Use the recorder (with a monitor and mouse)
  1. Move your cursor to the bottom edge of the screen to reveal the menu bar.
  2. At the bottom left of your screen, click the menu icon  .
  3. Click Settings and unlock the recorder if prompted.
  4. Go to Cameras > IP Channels.
  5. In the list of cameras, click the config icon   for the camera you want to update.
  6. From the Type dropdown, select DHCP.
  7. Click OK to update the camera.
  8. Click the delete icon   to remove the camera from the list.
  9. Disconnect the camera from the recorder.
Use the PC software
  1. At the top of the application window, click the recorder settings icon  .
  2. Go to Channel > Channel.
  3. In the list of cameras, click the config icon   for the camera you want to update.
  4. From the Type dropdown, select DHCP.
  5. Click OK to update the camera.
  6. Click the checkbox to select the camera from the list and click Delete.
  7. Disconnect the camera from the recorder.

Step 2: connect the Wi-Fi adapter to your network

The Wi-Fi Adapter can be connected to your network in two ways:

  1. Using the WPS button (quick and easy setup).
  2. Manual configuration (for routers without WPS support).
Option 1: setup via WPS button
  1. Plug the adapter into a power outlet and connect the camera to the adapter.
  2. Press and hold the WPS button on your router for 2 seconds. If your router has a software-based WPS button instead of a physical one, consult your router's user manual for instructions on how to activate it.
  3. Within 2 minutes, press and hold the WPS button   on the adapter for 2 seconds.
  4. The WPS button on the adapter will start flashing. Once the connection is successful, the WPS button's light will remain steady. This indicates the setup is complete.
Option 2: manual setup

Configure your computer:

  1. Connect the adapter to a power outlet.
  2. Use the network cable to connect your computer directly to the adapter.
  3. Adjust the IP configuration on your computer so it can communicate directly with the Wi-Fi adapter for manual setup:
Instructions for Windows
  1. Click the Windows start button, search for View network connections, and open the best match.
  2. Right-click the active Ethernet connection and select Properties.
  3. From the list of items, select Internet Protocol Version 4 (TCP/IPv4)
  4. Click the Properties button.
  5. Select Use the following IP address and enter the following details:
    • IP address: 192.168.1.123
    • Subnet mask: 255.255.255.0
    • Default gateway: 192.168.1.254
    • Preferred DNS server: 192.168.1.254
  6. Click OK to save the settings.
Instructions for macOS
  1. In the top-left corner, click the Apple menu and select System Settings.
  2. Go to Network and select an Ethernet service (you may need to scroll down).
  3. Click the Details button.
  4. Go to TCP/IP and change the settings below:
    • Configure IPv4: Manually.
    • IP address: 192.168.1.123
    • Subnet mask: 255.255.255.0
    • Router: 192.168.1.254
  5. Click OK to save the settings.

Configure the Wi-Fi adapter:

  1. Open a browser and enter http://192.168.1.254/ in the address bar to access the adapter's web interface.
  2. Log in with username admin and password admin.
  3. Go to Settings > Site Survey.
  4. Select your network from the list and click Next. If your network doesn't appear, click Site Survey to refresh the list.
  5. Enter your Wi-Fi password in the Pre-Shared Key field and click Connect.
  6. Click Reboot Now to apply the changes.
  7. Follow the instructions under “Configure your computer” again to reset your computer's network configuration to the default (DHCP) values.
  8. Once completed, connect your camera to the Wi-Fi Adapter.
URL copied.